Discovering the right ceiling fan is a bit more complicated than just walking into a shop and picking out something you like. Such factors as the size of the room and the ceiling height must be taken into consideration. In addition , top quality components should be sought as well as various options to meet your needs. For this reason an electrical contractor should be consulted to make sure it is the right admirer for room.
Calculate the Size of the Room
The first step an electrical company will do is take measurements to determine the size of the room. Generally speaking the larger the room, the longer the blade span has to be. In fact , very large rooms may require two or more fans. Blades ranges from 36 inches for a 100 square feet room to help 52″ for a 375 square feet room. The center of the room also needs to be determined as that is the best placement. However , regarding safety reasons never place a ceiling fan more than a bed.
Consider the Ceiling Height
An electrical contractor will also must determine the ceiling height as this can affect the type of install required. In general, fans should be no lower than seven foot from the floor. Eight to nine feet is desired. In fact , some building codes may mandate this. To get low ceilings, a flush mount can be installed. Pertaining to high ceilings or sloped ceilings, a down fly fishing rod may be used to drop the fan to a more preferred level.
Seek Quality Components
Quality components are another worry. An electrical contractor will advise clients to avoid cheap supplies. Instead, look for heavy, die-cast parts as these will help minimize noise and are less likely to wobble. Mounts that include closed bearings will last longer has they provide permanent lubrication. In addition , make sure the blades are weighted and balanced, as well as the fan is backed by a good warranty.
Consider Other Options
Besides matching the décor of the room, there are several other options an electrical contractor can suggest. For example , blade pitches range between 8 to 15 percent–the higher the pitch, the more atmosphere that is circulated. The contractor can also install such alternatives as dimmer switches, specialized lighting fixtures, programmable controls that will automatically adjust speed to match air temperature, and even wi-fi remotes.
Evaluate Electrical Needs
Finally, an electrical contractor will be aware exactly what kind of ceiling fan can be supported with the power circuits in place. Since many fans include lighting fixtures, the current routine may not be adequate and may need to be upgraded. Fans placed out-of-doors or in damp places may require special wiring or perhaps water resistant housing to avoid electrical shocks. Though it is not proposed, some fans can even be run on a swag that works from the ceiling to a nearby wall.
So if you are in the industry for a ceiling fan, make sure to consult an electrical contractor. They could help assess room size, ceiling height, quality components, further options, and electrical needs. If upgrades are advisable, these can easily be taken care of by the contractor. As a result, the perfect fanatic can be installed in almost any room. You will have the satisfaction in knowing an electrical contractor did it safely! best calling fan visit on http://www.lightningceilingfans.net/